Bộ điều khiển thyristor 3 pha cho tủ nạp ắc quy 110V-220VDC

12,500,000 ₫

STB63 Battery Charge and Discharge Control Module

3 phase 6 pulse, LCD interface, 4 charging stages, support one-stage discharge setting, 380V input, 1000A trigger capacity.

Mã: Charger_Control_3pha Danh mục:

Mô tả sản phẩm

STB63 battery charge and discharge control trigger board adopts 32-bit industrial grade high-performance microprocessor, highly digital military quality design, supports network remote control and on-site control mode. The fuzzy-PID parameter is open-ended, fault alarm and parameters are displayed on the LCD screen or touch screen menu Chinese, parameters are automatically saved after setting. With constant voltage and constant current regulation, the charging operation parameters are set by the LCD screen. The charging phase can be set up in four stages, each stage are set independently: charging current, charging voltage, current limit, charging time and jump voltage, support one-stage discharge parameter setting, users can set the charging parameters of pre-charging, fast charging, slow charging or floating charging according to the current battery charging curve freely. The operation is reliable, technology is advance, functions are complete, performance is stable, debugging is convenient and easy to maintain.

Technical specifications:
◆  Working power: 380Vac ±15% 50/60HZ
◆  The main circuit working voltage: 50 ~ 380Vac ± 15% 50 / 60HZ
◆  Voltage adjustment range: 1 ~ 300V
◆  Current adjustment range: 1 ~ 300A
◆  Phase shift range: 0 ~ 178 °
Adjust the output resolution: 1 / 4000
Stability accuracy: better than ± 1%
◆  Trigger current: ≥ 750mA trigger capacity: ≤ 1000A one-way thyristor
◆  PID dynamic response time: ≤ 50mS overshoot: ≤ 10%
◆  Input signal: DC0-5V, DC0-10V, 0-10mA, 4-20mA, 10K potentiometer adjustment
◆  Three-phase trigger imbalance: ≤ 0.3 °
◆  Applicable load: battery charge and discharge control
◆  Alarm relay contact capacity: 250Vac/10A
◆  Dielectric strength: 3500 VRMS
◆  Working environment conditions:
Ambient temperature: -20°C~ 60°C
Relative humidity: ≤ 90% RH (no frost)
Indoor installation: no flammable, no explosive, no corrosive gas, no conductive dust, vibration less than 0.5G
Altitude should be under 3000m, otherwise need to reduce the capacity level.2.14.
◆  Dimensions: 240 * 160 * 50mm
◆  Dimension between install holes: 225 * 145mm
◆  Weight: 1KG

Relevant peripheral accessories and products:
STP30 Constant Voltage Feedback ModuleSTP10 RC Absorption mModule
STP20 Three Phase Synchronous Transformer ModuleSTP22 6 Pulse Trigger Module
STP01 LCD Operation Display Screen ModuleSFP20 IGBT Driver Module